D. Up button (left arrow)
The Up button has multiple functions.
• In menu screens, use the Up button to move to a different selection.
• In video recording mode or photo mode, use the Up button to zoom in on your subject.
E. Down button (right arrow)
The Down button has multiple functions.
• In menu screens, use the Down button to move to a different selection.
• In video recording mode or photo mode, use the Down button to zoom out from
your subject.
F. Menu button
The Menu button has multiple functions.
• In video recording standby mode, short press the Menu button to enter the video
recording menus. Short press once more to enter the setup menus. Short press again
to exit the menus and go back to video recording standby mode.
TIP: In video recording
standby mode, press and hold the Menu button to change the camera views (left camera,
right camera or dual cameras).
In photo mode, short press the Menu button to switch between the left camera and the
right camera. (You cannot shoot a still photo with dual camera option.)
In playback mode, short press the Menu button to enter the playback menus. Short press
once more to enter the setup menus. Short press again to exit the menus and go back
to playback mode.
Use the Up/Down buttons to scroll through the menus. Press the OK button to confirm
your selections. Press the Menu button to EXIT the menus and go back to video recording
standby mode.
MP (Channel)
- Selects left camera, right camera or dual cameras.
EV (Exposure Value)
- Adjusts the brightness setting from -3 to +3.
AWB White Balance
- Adjusts the white balance to obtain the truest colors based on the
light source: Auto / Daylight / Cloudy / Fluorescent / Incandescent. NOTE: In most cases,
the “Auto” white balance setting is sufficient.
Loop Recording
- Selects how long you want each recording to last, before it is saved
and starts a new recording: off / 3 min. / 5 min. / 10 min.
Motion detection
- When the motion detection is activated, the camera will record
10 seconds when it detects any change in the video image it is receiving. It will stop
recording when there is no change in the video image.
Record audio
- Turns the built-in microphone on or off.
EXPLANATION OF BUTTONS (CONT.)
VIDEO RECORDING MENU
- 3 -
