Sharper Image 204939, Owner'S Manual

Page: 3 / 8

BEFORE YOU BEGIN
Carefully unpack package contents to make sure all parts are present
Some assembly is required.
@(¥)8@
8�®
GGGG
(1) Remote
(1) Ground Stake with
Attachment Screw
(1) 2- Prong Adapter
(1) Allen Key
(1) Light Projector
DO NOT PLUG IN LASER UNIT UNTIL PROMPTED IN THE STEPS BELOW
If you already have, unplug it now and follow the steps below in order.
ASSEMBLY
• To attach the ground stake,remove the screw and washer from the stake
using the Allen key.
• Use the same screw & washer to attach the stake to the pivot mount (see
assembly diagram labeled"1 ").
• Plug the 2-prong adapter into the outlet on the power supply transformer.
• Screw on the weather resistant cap tightly to help protect the connection
from the elements (see assembly diagram labeled "2").
• Insert the stake into the ground. Be careful to avoid other wires or hoses .
• Position the projection by loosening and tightening the angle adjustment
screws, using the Allen key (see assembly diagram labeled "1 ").