SET-UP:
1.
Take the telescoping poles out of the case.
Insert
the thickest part of the telescoping pole
(#1)
into
the holes on the ends of the case (#7)
until you
hear the spring pin lock in place. See
Figure 2 and
Detail A.
2.
Once the telescoping poles are secured in the
case,
carefully pull from the top pole (#4) until
all the
poles are extended and the spring pins
automatically lock in place. See Figure 1.
NOTE: If
rubber caps (#11) are not already
installed
on the
poles
(#4) slide them on the end of
the tube as
shown in
Figure 1.
3.
Insert the thinnest part of the telescoping pole
(#4)
into the sleeve on one end of the net (#5)
and then
carefully insert it on the other end. See
Figure 1.
NOTE: To prevent the game from tipping over
during
windy conditions or when playing on
grass put
something inside the Storage Tray (#8).
TAKE DOWN:
1. Take-Down is reverse of Set-up, make sure you
store all parts back in the Storage Case.
Net Sleeve
Net Sleeve
Spring Lock
Spring Lock
1
2
3
4
5
7
8
9
10
Spring Lock
Thickest
Thinnest
Detail A
7
1
1
Figure 1
Figure 2
- 2 -
11
