XG-PH70X/XG-PH70X-N (1st. Edition)
3 – 2
for reference / setting
6
Adjustment of
component Cr/
Cb offset (1)
1. Feed the color difference signal
(480i) to INPUT1
: Y 0% brightness, Cb and Cr 0%
white patterns.
2. Select the following group and
subject.
Group : COMPO
Subject : COMPO-AUTO
1. After signal input, select COMPO-AUTO for automatic adjustment.
7
Adjustment of
component
brightness
1. Feed the color difference signal
(480i) to INPUT1
: Y 0% brightness, Cb and Cr 0%
white patterns.
2. Select the following group and
subject.
Group : COMPO
Subject : G-BRIGHT
1. Make adjustment so that some bits should be missing in the picture.
* refer to the following photo image
8
Adjustment of
component Cr/
Cb offset (2)
1. Feed the color difference signal
(480i) to INPUT1
: Y 0% brightness, Cb and Cr 0%
white patterns.
2. Select the following group and
subject.
Group : COMPO
Subject : CR-OFFSET
1. Reduce the CR-OFFSET value by 2 points.
9
Adjustment of
RGB white bal-
ance
1. Feed the 50% gray pattern signal
(XGA, 60 Hz) to INPUT1.
2. Select the following group and
subject.
Group : DLP
Subjects : R1-GAIN (Red)
B1-GAIN (Blue)
1. Adjust R1-GAIN and B1-GAIN so that x-value should be 290
±
3 and y-
value 310
±
3.
10
Adjustment of
sRGB white bal-
ance
1. Feed the 50% gray pattern signal
(XGA, 60 Hz) to INPUT1
2. Select the following group and
subject.
Group : DLP
Subjects : S-G1-GAIN (Green)
S-B1-GAIN (Blue)
1. Adjust S-G1-GAIN and S-B1-GAIN so that x-value should be 313
±
5 and y-
value 329
±
5.
11
adjustment of
video white bal-
ance
1. Feed the 50% gray pattern signal
(NTSC, burst signal) to INPUT4.
2. Select the following group and
subject.
Group : DLPV
Subjects : V-R1-GAIN (Red)
V-B1-GAIN (Blue)
1. Adjust V-R1-GAIN and V-B1-GAIN so that x-value should be 290
±
3 and y-
value should be 310
±
3.
12
Adjustment of
DTV white bal-
ance
1. Feed the 50% gray pattern signal
(480i, color difference signal) to
INPUT1.
2. Select the following group and
subject.
Group : DLPV
Subjects : C-R1-GAIN (Red)
C-B1-GAIN (Blue)
1. Adjust C-R1-GAIN and C-B1-GAIN so that x-value should be 290
±
3 and y-
value should be 310
±
3.
13
Factory settings
1. Select the following group and
subject.
Group : SSS
Subject : S4 (North America)
S3 (Europe/Asia/Australia)
S5 (Japan)
1. Make the following settings.
PH70XU : S4 (to north America)
PH70X : S5 (to Japan)
Other : S3 (to Europe/Asia/Australia)
OSD language
Video-set up level
S3
English
0IRE
S4
English
7.5IRE
S5
Japanese
0IRE
No.
Adjusting point
Adjusting conditions
Adjusting procedure
Summary of Contents for XG-PH70X - XGA DLP Projector
