Sharp XE-A407 Page 69 Instruction Manual Download

Page: 69 / 116

Personnel Programming

Use the following procedure to select any option included in the personnel group:

Procedure

In the SETTING window, select “5 PERSONNEL.”

• The PERSONNEL window will appear.

Select any option from the following options list.

1 CLERK

Clerk

2 MANAGER

Manager

3 MODE PASS CODE

Mode Pass Code

4 TRAINING CLK

Training Clerk

The following illustration shows those options included in this programming group.

5 PERSONNEL

1 CLERK

See “Clerk” this page.

2 MANAGER

See “Manager” on page 68.

3 MODE PASS CODE

See “Mode Pass Code” on page 68.

4 TRAINING CLK

See “Training Clerk” on page 68.

■

Clerk

Procedure

Program each item as follows:

Select a clerk code, or directly enter a
clerk code.

• PASS CODE (Use the numeric entry)

Pass code (max. 4 digits: 0001 to 9999/0000)

• Text (Use the character entry)

Description for the clerk name (Up to 16 characters can be
entered.)

• AUTO KEY (Use the selective entry)

ENABLE: Enables operation of the

key.

DISABLE: Disables operation of the

key.

NOTE

To delete a clerk code in the

“

CLERK

”

window, select the clerk code and press the

key.

A confirmation window appears to ask you whether to delete the clerk, select the option you
prefer.

Summary of Contents for XE-A407





















































































































Search results

Summary of Contents for XE-A407

Reviews:

Related manuals for XE-A407

Brands by name

Popular brands

Sharp XE-A407, Instruction Manual

Search results

Summary of Contents for XE-A407

Reviews:

Related manuals for XE-A407

Brands by name

Popular brands