Sharp XE-A107 Instruction Manual Download Page 17 | Manualshive

Page: 17 / 36

Sharp XE-A107 Instruction Manual Download Page 17

15

15

VAT.(Tax).Calculation

Your cash register provides the following six tax systems.

Your cash register is pre-programmed as manual VAT 1 to 4 system.

Auto.VAT.1.to.4.system.(automatic.operation.method.using.programmed.percentages)

This system, at settlement, calculates VAT for taxable 1 through 4 subtotals by using the

corresponding programmed percentages.

Auto.tax.1.to.4.system.(automatic.operation.method.using.programmed.percentages)

This system, at settlement, calculates taxes for taxable 1 through 4 subtotals by using the corresponding

programmed percentages, and also adds the calculated taxes to those subtotals, respectively.

Manual.VAT.1.to.4.system.(manual.entry.method.using.programmed.percentages)

This system provides the VAT calculation for taxable 1 through 4 subtotals. This calculation is
performed using the corresponding programmed percentages when

U

is pressed just after

u

.

Manual.VAT.1.system.(manual.entry.method.for.subtotals.that.uses.VAT.1.preset.percentages)

This system enables the VAT calculation for the subtotal. This calculation is performed using the
VAT 1 preset percentage when

U

is pressed just after

u

. For this system, the keyed-in VAT rate

can be used. In this case, after pressing

u

, enter the VAT rate and press

U

.

Manual.tax.1.to.4.system.(manual.entry.method.using.preset.percentages)

This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is
performed using the corresponding programmed percentages when

U

is pressed just after

u

.

After this calculation, you must finalize the transaction.

Auto.tax.1.to.3.and.auto.VAT.1.system

This system enables the calculation on the combination with automatic tax 1 through 3 and

automatic VAT 1. The combination can be any of VAT 1 corresponding to taxable 4 and any of tax 1

trough 3 corresponding to taxable 1 through 3 for each item. The tax amount is calculated

automatically with the percentages previously programmed for these taxes.

NOTE

VAT/tax calculation for PLU items are performed according to the one set for its

associated department.

«
...
15
16
17
18
19
...
»

Summary of Contents for XE-A107





































Reviews:

No comments