Sharp Vodafone 802SH, Service Manual

Page: 87 / 121

802SH
6 – 10
CONFIDENTIAL
IC1001 VH+-1L (BGB202): BLUETOOTH
Pin No. Terminal name Input/Output Description of terminal
1 GND – Earth
2 ANT Input/Output Aerial input/output
3 GND – Earth
4 GND – Earth
5 GND – Earth
6 GND – Earth
7 GND – Earth
8 GND – Earth
9 GND – Earth
10 GND – Earth
11 GND – Earth
12 GND – Earth
13 GND – Earth
14 GND – Earth
15 GP_CLK Output General purpose clock
16 VBAT Input Battery measurement voltage input
17 VANLI Input 8-bit A/D input
18 XTAL2_LPO Output Low power crystal oscillator
19 XTAL1_LPO Input Low power crystal oscillator
20 GPIO[1] Input/Output I2C_SDA
21 GPIO[0] Input/Output I2C_SCL
22 VANLO Output Analogue voltage source output
23 GPIO[13] Input/Output General purpose I/O 13
24 GPIO[11] Input/Output General purpose I/O 11
25 GPIO[10] Input/Output General purpose I/O 10
26 1.8 V DECOUP – VDD18 decoupling
27 POR_
DISABLE Input Power-On Reset disable input
28 XTAL2_SYS Output System clock crystal oscillator
29 XTAL1_SYS Input System clock crystal oscillator
30 REF_CLK Output Synthesiser reference frequency
31 GPIO[12] Input/Output General purpose I/O 12
32 GPIO[14] Input/Output General purpose I/O 14
33 GPIO[7]
FSC_IP Input General purpose I/O 7
PCM/IOM frame sync
34 GPIO[9]
DB_IP Input/Output General purpose I/O 9
Bidirectional PCM/IOM data line B (default: input)
35 GPIO[6]
DA_IP Input/Output General purpose I/O 6
Bidirectional PCM/IOM data line A (default: output)
36 GPIO[8]
DCLK_IP Input General purpose I/O 8
PCM/IOM data clock
37 VDD18 Input 1.8 V I/O supply voltage
38 VDD_IOV Input Variable I/O supply voltage
39 VDDIORF Input RF supply voltage
40 VREG18 Output 1.8 V regulated output voltage
41 GPIO[3]
RTS_UART Input General purpose I/O 3
UART request-to-send input
42 GPIO[5]
RXD_UART Input General purpose I/O 5
UART receive input
43 GPIO[4]
TXD_UART Output General purpose I/O 4
UART transmit output
44 GPIO[2]
CTS_UART Output General purpose I/O 2
UART clear-to-send output
45 RESET_N Input Reset input (active LOW)
46 1.8 V DECOUP – VDD18 decoupling
47 TMS_JTAG Input JTAG test mode select
48 TDO_JTAG Output JTAG test data output
49 TDI_JTAG Input JTAG test data input
50 TCK_JTAG Input JTAG test clock