Sharp Vodafone 802SH, Service Manual

Page: 51 / 121

802SH
3 – 3
CONFIDENTIAL
[2] Disassembly and reassembly
• To reassemble, reverse the procedure.
Note that the aerial cover needs to be installed after assembling the
back cabinet (key side).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
STEP REMOVAL PROCEDURE FIGURE
1 Back Cabinet
(Display)
Assembly 1.Battery Cover........
2.Li-Ion Battery.........
3.Screw Cover..........
4.Screw....................
5.Hook..................... (A1)x1
(A2)x1
(A3)x3
(A4)x6
(A5)x2 1
2
3
2 Display Holder
Assembly 1.Socket...................
2.Hook..................... (B1)x1
(B2)x2 4
3 Display
PWB-B 1.Solder....................
2.Flat Cable..............
3.Hook.....................
4.Hook..................... (C1)x3
(C2)x2
(C3)x1
(C4)x1 5
(A1) x 1
(A2) x 1
Back Cabinet (Key)
(A3) x 1
(A4) x 2
M1.4 x 2.8mm
(A4) x 2
M1.7 x 6.0mm
(A4) x 2
M1.7 x 5.0mm
(A3) x 2
Back Cabinet (Display)
Open
Top belt
(A5) x 2
Insert a jig into the gap between the Top belt and back cabinet
(Display side), and slide it to remove the hook A5.
Slide
Back Cabinet
(Display)
Jig
(Use something flat and hard,
for example guitar picks.)
1
2
3
4
4
(B2) x 1
(B1) x 1
Top belt
Front/Back Cabinet
(Key)
Display Holder Unit
Remove the cabinet protection and Top belt.
Remove the socket B1.
Lift and pull off the front/back cabinet (key side).
Remove the hook B2. 1
2
3
4
(B2) x 1
Display PWB-B
Tape, Kapton
Display Holder
Unit
(C4)x1*
(C2)x1
(C2)x1
(C3)x1*
(C1)x2
(C1)x1
Remove the hook C3,
and then the hook C4.
*
Set it
upright.
Pull and set it
upright.