Sharp Vodafone 802SH Service Manual Download Page 39

Page: 39 / 121

802SH

2 – 31

CONFIDENTIAL

10. Camera does not operate.

(From page 2-30)

Is 3.2 V or more applied to TP3004?

The thin coaxial cable is broken, or the thin
coaxial cable socket is in poor contact.

Is the waveform of TP3002 a rectangular
wave?

R3008A is mounted improperly, or the display
PWB and the main PWB are defective.

IC3000 is defective.

The camera does not operate. Enter the test
mode.

Replace the camera module to a properly work-
ing one, and activate the camera.

Is the image through the camera lens properly
displayed?

The camera module is defective.

Replace the SD PWB to a properly working
one, and activate the camera.

Is the image through the camera lens properly
displayed?

The SD PWB is defective.

Replace the the flexible PWB connected to the
SD PWB to a properly working one, and acti-
vate the camera.

Is the image through the camera lens properly
displayed?

The SD P.W.B. connect FPC is defective.

Replace the main PWB to a properly working
one, and activate the camera.

Is the image through the camera lens properly
displayed?

The main PWB is defective.

YES

Summary of Contents for Vodafone 802SH


























































































































Search results

Summary of Contents for Vodafone 802SH

Reviews:

Related manuals for Vodafone 802SH

Brands by name

Popular brands

Sharp Vodafone 802SH, Service Manual

Search results

Summary of Contents for Vodafone 802SH

Reviews:

Related manuals for Vodafone 802SH

Brands by name

Popular brands