manualshive.com logo in svg

Sharp VL-H870U, Service Manual

Share
Download
Sharp VL-H870U Service Manual Download Page 4

VL-H870U

VL-H875U

VL-H890U

VL-H870U

VL-H875U

VL-H890U

1-3

                                                            

   The RBRC

TM

 Seal

      SHARP participates in the RBRC

TM

* Nickel-Cadmium Battery Recycling Program in the United

States. The RBRC

TM

 Seal on our battery pack contained in our product indicates that SHARP is

voluntarily participating in an industry program to collect and recycle these batteries. The RBRC

TM

program provides you with a convenient alternative to placing spent Nickel-Cadmium battery packs into
the trash or municipal waste stream, which is illegal in some areas. At the end of their useful life, the
Nickel-Cadmium battery can be dropped off at the nearest collection center for recycling. For information
on the nearest collection center, call 1-800-8-BATTERY or your local recycling center. If you are located
outside the United States, contact your local authorities for information concerning proper disposal and/
or recycling of this battery. SHARP’s involvement in this program is part of our commitment to protecting
our environment and conserving natural resources.
      [Footnote] *RBRC

TM

 is trademark of the Rechargeable Battery Recycling Corporation.

  The following program is available in the United States. Please consult local environmental
 authorities concerning the availability of this or other programs in your area.

   

 CAUTION

BEFORE BATTERY DESTROY

NICKEL-CADMIUM BATTERY

NICKEL-METAL HYDRIDE BATTERY

Battery disposal
Contains the above (Rechargeable) Battery.  must be recycled or disposed of properly.
Remove the Battery from the products and contact Federal or State Environmental Agencies for
information on recycling and disposal options.

SEALED LEAD BATTERY

LITHIUM   or  LITHIUM-ION BATTERY

Summary of Contents for VL-H870U





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands