93
Digital Still Camera Features
To USB terminal
USB cable (supplied)
8
Insert a card that contains recorded still images into camcorder.
9
Connect the camcorder to the computer with the supplied USB cable as shown
below.
• It is recommended to use the AC adapter as a power source for extended periods of
use.
• Connect the USB cable directly to the USB terminal of computer.
• To prevent malfunction, turn off the camcorder when you connect to the computer.
To USB terminal
10
Set the Media Selection switch to
u
.
11
Hold down the Lock button and set the Power switch to
w
.
• Computer will recognize the camcorder automatically.
Note:
• If you restart computer after installing the USB driver, remove the CD-ROM and insert it again or
click the icon of the CD-ROM on computer’s screen.
12
Click the “PixLab Media Browser” button on the Setup screen, and then follow the
instructions as they appear on the screen until the installation is completed.
VL-Z800S-GB-084-097
04.1.23, 8:11 AM
93
Summary of Contents for Viewcamz VL-Z800S-S
Page 2: ......
