Preparation
Preparation
13
Inserting and Removing
a Card
You can use an SD Memory Card or a
MultiMediaCard for storing still images.
Inserting
1
Make sure that the Power switch is set
to OFF.
2
Slide the card slot cover release and
open the card slot cover in the direction
of the arrow.
3
Insert a card into the slot as shown
below, and push it in as far as it will go.
4
Close the card slot cover.
Removing
Perform steps 1 and 2 above, push the card
(
1
) and pull the card straight out (
2
) as shown
below.
Notes:
• You can use only the SD Memory Card or the
MultiMediaCard (see page 71).
• The supplied card is preformatted for immediate
use.
• See pages 73 and 74 for more information on the
cards intended for use with this camcorder.
Caution:
• Do not remove the card from the camcorder
while recording data on the card (
S
indicator
flashes during recording). This may delete the
recorded image or damage the card.
About the write-protect switch
SD Memory Card has a write-protect switch.
When the switch is set to the locked position,
you cannot record/delete data or format the
card. Set it to the unlocked position to record/
delete data or format the card.
Card slot cover release
Label
Clipped corner
Back view
Locked position
Unlocked position
Write-protect
switch
Summary of Contents for ViewCam VL-NZ100U
Page 110: ...Note ...
Page 111: ......
