23
If problems persist contact the SHARP Helpline on tel: 0990-274277
ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
1.
Press
PLAY/X2
to start the video tape playing.
2.
Press the
SKIP SEARCH
on the remote
control.
The number of times you press
SKIP SEARCH
determines the forward search time.
•
After searching, normal playback
will resume automatically
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
Your VCR records a marker signal on the tape at the start of each recording. These signals can
be used later to locate the starting point of a recording.
Press
DPSS
to locate a previous programme or the next programme.
For example,
1.
Load the video tape into the VCR.
2.
Press
DPSS
three times. The number
3
will appear on the on-screen display, and the
VCR will fast forward to locate the third recording after the current one.
3.
Press
DPSS
once.
-
1
will appear on the on-screen display and the VCR will rewind to
locate the beginning of the current recording.
4.
To cancel the search before it has finished, press
STOP
or
PLAY/X2
.
NOTES:
•
Recordings must be longer than 3 minutes.
•
The starting point of playback may vary.
•
This feature will only work with video tapes recorded on a VCR with the DPSS feature.
PLAY / X2
1 press = 30 seconds.
2 presses = 1 minute.
3 presses = 1 minute 30 seconds.
4 presses = 2 minutes.
SKIP
SEARCH
SKIP
SEARCH
/
-1
+1
+2
+3
RECORDING 5
RECORDING 4
RECORDING 3
RECORDING 2
RECORDING 1
DPSS Signals
Current tape position
Fast Forward
Rewind
DPSS
Number
STOP
PLAY / X2
VC-MH713HM.book Page 23 Monday, May 8, 2000 11:53 AM
