background image

38

VC-MH705HM/LM
VC-MH815HM/LM,MH85HM
VC-MH715HM,MH835HM

MECHANISM TROUBLESHOOTING

1. FF/REW FAILURE (NO TAPE WINDING)

Press FF key.

NO

NO

NO

NO

NO

NO

NO

NO

YES

YES

YES

YES

YES

YES

YES

YES

Is master cam at

FF position ?

Does loading

motor operate ?

Modes changing

smoothly through

mode switch ?

Loading motor

control system

in trouble.

Are Vco 24V and

Vcc 5V applied ?

Replace the

capstan motor.

Replace the idler

ass’y.

Replace the reel

sensor.

Is voltage applied

to loading motor ?

Loading motor is

damaged. Replace

it.

Voltage supply

system in trouble.

Mode SW in 

trouble or master 

cam malpositioned.

Voltage supply

system in trouble.

Does capstan

motor turn in FF (or

REW) direction ?

Are idler wheel

ass’y and reel disk

in mesh ?

Is the pulse

outputted from reel

sensor ?

The cassette tape

is presumably

damaged.

2. REC/PLAY FAILURE (MODE RELEASE)

NO

NO

NO

NO

NO

NO

NO

YES

YES

YES

YES

YES

YES

YES

YES

Is the master cam

at PB position ?

Does loading

motor operate ?

Modes changing

smoothly through

mode switch ?

Loading motor

control system

in trouble.

Are Vco 24V and

Vcc 5V applied ?

Replace the

capstan motor.

Replace the idler

ass’y.

Replace the reel

sensor.

Is voltage applied

to loading motor ?

Loading motor is

damaged. Replace

it.

Voltage supply

system in trouble.

Voltage supply

system in trouble.

Does capstan

motor turn ?

Are idler wheel

ass'y and reel disk

in mesh ?

Is the pulse 

outputted from reel

sensor ?

Check main PWB.

www.freeservicemanuals.info

6/17/2019

Digitized in Heiloo the Netherlands

Not for  sale!

Summary of Contents for VC-MH705HM/LM










































































Reviews: