Messages and Signals
79
9. T
roub
le-
shooting
INCORRECT FILM/
CHECK FILM
The wrong type of imaging film is loaded in the
machine. Printing is not possible. The machine can
only print when SHARP UX-9CR imaging film is
loaded.
LINE ERROR
Transmission or reception was not successful. Press
the
STOP
key to clear the message and then try
again. If the error persists, see
Line Error
on page 73.
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
The memory is full. This may occur during fax
reception if too much data is received before the
pages can be printed out. If faxes have been received
to memory because printing is not possible (an
additional message will indicate the problem), resolve
the problem so that printing can continue (see
Substitute Reception to Memory
on page 50). If you
are attempting to transmit from memory, see
If the
memory becomes full
on page 40. If you are copying,
see
If MEMORY IS FULL appears
on page 51.
MEMORY PRINTING
The fax is preparing to or printing out a document
from memory.
NEAR END OF FILM/
REPLACE FILM
This message appears approximately 3 m from the
end of the imaging film (approximately 10 pages can
still be printed), and alerts you that you will soon need
to replace the film.
NO DATA
This appears if you attempt to search for an auto-dial
number when none have been stored.
OFF HOOK
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the
STOP
key to clear the message.
ON HOOK DIAL
The
key has been pressed and the fax machine
is waiting for you to dial.
OVER HEAT
The print head has overheated. Operation can be
continued after it cools. If overheating frequently
occurs, try changing the print contrast setting to
LIGHT (see page 16).
all.book Page 79 Friday, March 25, 2005 4:11 PM
Summary of Contents for UX-P410
Page 14: ......
