Sharp UX-BD80 Operation Manual Download Page 65

Page: 65 / 183

Other Features

2. Cordless

Handset

Press

once. The duration appears.

Press

repeatedly to exit.

End call setting

When this setting is turned on, calls can be ended by simply replacing the
handset in the cradle (or charger if you have one) (there is no need to press

). Note that a call will end even if it has been placed on hold.

Press

3 times.

Press

once.

Press

once.

Press

to select ON or OFF

and then press

Press

repeatedly to exit.

Cordless handset display:

4 SET

41 END CALL

Turning the cordless handset power on and off

To conserve battery power, you can turn the cordless handset off. To turn off

the power, hold down

until the display goes blank. To turn the power on,

hold down

until the display turns on. The power also turns on

automatically when the cordless handset is placed in the cradle (or charger if
you have one).

DONE

all.book Page 63 Wednesday, October 6, 2004 3:44 PM

Summary of Contents for UX-BD80
























































































































































































Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands

Sharp UX-BD80, Operation Manual

Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands