Sharp UX-BD80 Operation Manual Download Page 59

Page: 59 / 183

Transferring Calls

2. Cordless

Handset

Transferring Calls

You can transfer a call to the machine or to a cordless handset.

Transferring a call from a cordless handset to the machine

Note:

It is not possible to talk with the person who answers on the machine

before transferring a call.

During the call, press

on the cordless handset (the call is put on

hold).

Press

to select the machine.

•

To cancel the transfer and return to the initial caller, press

Press

to transfer the call to the machine.

•

The other person presses

on the machine to answer.

DIGITAL

SPEAKERPHONE

If a call comes in while the Intercom feature is being used

If an outside call comes in while you are using the Intercom feature, the
person who wishes to take the call should first stop the Intercom call (press

on the cordless handset or press

on the machine), and

then answer the outside call (press

on the cordless handset or press

on the machine).

DIGITAL

SPEAKERPHONE

DIGITAL

PEAKERPHON

Talk with the other person (speak facing the operation panel). When you

are ready to end the conversation, press

DIGITAL

SPEAKERPHONE

all.book Page 57 Wednesday, October 6, 2004 3:44 PM

Summary of Contents for UX-BD80
























































































































































































Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands

Sharp UX-BD80, Operation Manual

Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands