Sharp UX-BD80 Operation Manual Download Page 16

Page: 16 / 183

Icons in the cordless handset display

--1--

This indicates how much power is left in the batteries.

This indicates that the cordless handset ringer (and the beeps that sound
when keys are pressed) are turned off (silent ring).

This indicates when

is pressed on the cordless handset, and blinks

when a call comes in.

This appears when a new SMS message has been received in the machine

(this changes to

when all SMS messages have been read). Note that the

cordless handset cannot be used to read SMS messages.

This appears when new messages have been received in the fax machine’s
answering system.

This appears when the cordless handset and the fax machine are able to
communicate.

all.book Page 14 Wednesday, October 6, 2004 3:44 PM

Summary of Contents for UX-BD80
























































































































































































Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands

Sharp UX-BD80, Operation Manual

Search results

Summary of Contents for UX-BD80

Reviews:

Related manuals for UX-BD80

Brands by name

Popular brands