Making Telephone Calls
92
Comments:
♦
While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other
party.
♦
The fax may interrupt a voice call received on an extension phone if
the reception mode is set to A.M. and there is a period of silence
during the conversation. If you are on a tone dial phone, you can
prevent this by pressing any three keys on the phone immediately
after you answer. (Note: Do not enter the code to activate fax recep-
tion:
5
,
*
,
*
.)
Chain Dialling
After lifting the handset, you can dial any combination of Normal
Dialling, Rapid Key Dialling and Speed Dialling numbers. For
example, if you have stored an area code or an access code for a
special service in a Rapid Key, you can press the Rapid Key for that
area code or access code, then dial the remainder of the number by
pressing a Rapid Key, pressing number keys, or pressing the
SPEED
DIAL
key and entering a two-digit Speed Dial number.
Searching for an auto-dial number
You can use the
SEARCH/R
key to search for a Rapid Key or Speed
Dial number. First search for the number as described in
Searching for
an auto-dial number
in
Sending a Fax by Automatic Dialling
in
Chapter 3, then pick up the handset or press the
SPEAKER
key. The
number will be dialled automatically (do not press the
START
key).
Redial
The last number dialled can be redialled by pressing the
REDIAL
key
(it is not necessary to pick up the handset or press the
SPEAKER
key). When the other party answers, pick up the handset to talk.
all-UX84H.book Page 92 Wednesday, July 5, 2000 8:48 AM
http://www.usersmanualguide.com/