Sharp UX-238 Operation Manual Download

Page: 51 / 107

<P=001>

Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a
document.

The default resolution setting is STANDARD and the default contrast setting is
AUTOM..

You must adjust the settings each time you don’t want to use the default settings.

Note: The resolution and contrast settings are only effective for
transmitting a document. They are not effective for receiving a document.

Resolution settings

STANDARD:

Use STANDARD for ordinary documents. This setting

gives you the fastest and most economical transmission.

FINE:

Use FINE for documents containing small letters or fine
drawings.

SUPER FINE
(UX-238 only):

Use SUPER FINE for documents containing very small
letters or very fine drawings.

HALF TONE:

Use HALF TONE for photographs and illustrations. The
original will be reproduced in 64 shades (UX-51: 16
shades) of grey.

Note: In order to transmit in FEIN or SUPERFEIN resolution, the
receiving fax machine must also have that resolution. If it doesn’t, your
machine will automatically step down to the next best available setting.

Contrast settings

AUTOM.

Use AUTOM. for normal documents.

DUNKEL

Use DUNKEL for faint documents.

Resolution and Contrast

Summary of Contents for UX-238












































































































Search results

Summary of Contents for UX-238

Reviews:

Related manuals for UX-238

Brands by name

Popular brands

Sharp UX-238, Operation Manual

Search results

Summary of Contents for UX-238

Reviews:

Related manuals for UX-238

Brands by name

Popular brands