5. Removing the power supply unit
and AC cord
1) Remove the two screws
.
2) Remove the AC cord cover
.
3) Use a minus screwdriver
to loosen the AC cord fixing screws (2
pcs.) of the power supply unit.
4) Remove the screw
and the earth wire
from the AC cord.
5) Remove the power supply cable
.
6) Remove the four screws
.
6. Replacing the power supply unit
and AC cord
Install the in the power supply unit and AC cord in the reverse order
of removing.
Before installing, make sure that each connector is connected se-
curely.
When connecting the AC cord to the power supply unit in
assembly, tighten with the torque of 3 kg/cm
±
1 kg/cm.
7. Removing the LCD unit
1) Remove the LCD unit
.
a) Remove the screw
.
b) Remove the tilt cover
.
c) Remove the core
.
d) Remove the three Screws
.
2) Remove the LCD rear cabinet
.
a) Remove the two Screws
.
b) Remove the pawls
to
of the LCD rear cabinet
in that
order.
Caution:
Please do not place the LCD unit on hard surfaces, Please take
special care not to place the LCD unit on any surface that may cause
damage to the unit.
6
3
4
6
6
5
1
2
A
1
2
2
b
a
c
a
b
c
d
e
f
g
h
i
j
l
k
4
3
