manualshive.com logo in svg

Sharp UP-3300, Instruction Manual

The Sharp UP-3300 is a versatile and efficient point-of-sale system designed to streamline your business operations. Enhance your productivity with our Supplement Manual, available for free download on manualshive.com. Equip yourself with this comprehensive manual to maximize the potential of your Sharp UP-3300 for free!

Share
Download
background image

235

14

Drink Dispenser

Your POS terminal can be connected with a drink dispenser.
The summary of drink dispenser operations is shown below.

The data such as GLU codes, clerk codes, 
sort numbers and so on which are entered 
at a drink dispenser is sent to the POS 
terminal.

Received data is 
overwritten to an 
applicable GLU 
code.

Drink dispenser

UP-3300

When an entry error is found, perform the following steps:

1.

Check the error by the drink dispenser misoperation file reading or drink dispenser error reading.

Drink dispenser misoperation file reading 

REG or MGR mode

Clerk report 

OP X/Z or X1/Z1 mode

If there is misoperation data when you take an individual or full clerk X/Z report, the machine
waits for selection of one of the following three commands (RETRY, ABORT and IGNORE)
through the keyboard.

1 RETRY:

attempts to retry the report issuing job.

2 ABORT:

cancels the report issuing job.

3 IGNORE:

issues the report, disregarding that there is misoperation data. In the case of
the Z report, misoperation data is also reset.

Drink dispenser error reading 

X1/Z1 mode

2.

Correct the error with the drink dispenser correction in the REG or MGR mode.

The error which relates to GLU codes can be corrected. However, the error which relates to PLU
codes or clerk codes cannot be corrected with the drink dispenser correction.

Procedure to return from Off-line to On-line mode

Case 1:
The drink dispenser was set to Off-line only for a short term and there have been no change in GLU
occupations (same guests at the same table).
The data-buffer of the drink dispenser can be emptied by using the DD reset function (Z1 mode). The POS
terminal - drink dispenser line is automatically set to On-line by this function.

Case 2:
The drink dispenser was set to Off-line for a long term. Therefore, the use of the DD reset function is not
applicable because GLU occupations have been changed, meanwhile. Empty the drink dispenser data-
buffer at the drink dispenser directly and set the POS terminal - drink dispenser line to On-line manually.

Summary of Contents for UP-3300


























































































































































































































































Reviews:

No comments

Related manuals for UP-3300

Vectron POS Touch 12 User Manual preview
POS Touch 12
Brand: Vectron Pages: 80
Unitech TASHI MT38NOREADER01 User Manual preview
TASHI MT38NOREADER01
Brand: Unitech Pages: 39
Acrel ARTU Installation & Operation Instructions preview
ARTU
Brand: Acrel Pages: 23
Burnside T400FX User Manual preview
T400FX
Brand: Burnside Pages: 25
Pepperl+Fuchs Z-System Manual preview
Z-System
Brand: Pepperl+Fuchs Pages: 30
Pax Technology S900 User Manual preview
S900
Brand: Pax Technology Pages: 7
National Instruments VXI-TB-1000 Installation Manual preview
VXI-TB-1000
Brand: National Instruments Pages: 7
CabCard BP 5000 Quick Start Manual preview
BP 5000
Brand: CabCard Pages: 4
Omron DRT1-ID Quick Start Manual preview
DRT1-ID
Brand: Omron Pages: 8
Wincor Nixdorf BEETLE /iPOS plus Advanced User Manual preview
BEETLE /iPOS plus Advanced
Brand: Wincor Nixdorf Pages: 73
OEZ OD-BH-KS43 Instructions For Use preview
OD-BH-KS43
Brand: OEZ Pages: 4
Bluebird CT281 User Manual preview
CT281
Brand: Bluebird Pages: 24
Bluebird CT280 User Manual preview
CT280
Brand: Bluebird Pages: 31
Hisense HK560M User Manual preview
HK560M
Brand: Hisense Pages: 13
Hisense HK316 User Manual preview
HK316
Brand: Hisense Pages: 18
wallee PAX A50 Manual preview
PAX A50
Brand: wallee Pages: 6
Radiant P1220 POS User Manual preview
P1220 POS
Brand: Radiant Pages: 25
ICP BIA DESK User Manual preview
BIA DESK
Brand: ICP Pages: 31

Brands by name

Popular brands

Load more brands