3-2 Electric operation panel (Fig. 6)
1.
Horizontal spindle start button
2.
Horizontal spindle stop button
3.
Table feed motor start button
4.
Table feed motor stop button
5.
Emergency stop button
6.
Cutting oil pump switch
Fig. 6
3-3 Start and stop for horizontal spindle
Push the horizontal spindle start button (1) (Fig. 6) to run the spindle.
Push the horizontal spindle stop button (2) (Fig. 6) to stop the spindle.
3-4 Start coolant system
The machine is provided a coolant system. Turning the coolant oil pump switch (6) (Fig. 6) to
the right and the cutting oil can be provided.
3-5 Emergency stop
This button (5) (Fig. 6) is pushed to put a stop in case of emergency. If this button is pushed, all
the movements of the mill are stopped immediately. It is released when push this button again.
Chung Sing 11
VERSION: 2
Summary of Contents for UH-3
