background image

3-7-2 Operation of cross power feed

 

Start feed motor by turning button (3) (Fig. 6) and then lever (5) (Fig.5) upwards for the 

saddle to feed towards the column, and for the saddle to feed away from the column move 

lever (5) (Fig.5) downwards. 

3-7-3 Operation of vertical power feed

 

Start feed motor by turning button (3) (Fig. 6) and then move lever (6) (Fig. 5) upward to 

feed the knee upwards to move lever (5) (Fig. 5) downward, to feed the knee downward. 

3-7-4 Operation of longitudinal power feed

 

Start feed motor by turning button (3) (Fig.6) and then move lever (6) (Fig.5) and then 

move lever (4) (Fig.5) right for the table to feed from the left move the right and for the 

table to feed from right to left mover lever (4) (Fig. 5) to left. 

3-7-5 Choice of feed speed

 

Feeding speed is dependent on the spindle speed, material of work piece, tips if cutter and 

diameter of cutter (Table 6). With this machine, 12 steps of cutting feed and rapid feed are 

carried out from the feed box which is under the side of saddle. 

Turning the switch (3) (Fig. 6) to “ON” position to start the table longitudinal feed motor. 

Move lever (10) (Fig. 5) to position A, B or C dependent upon feed range required and 

move lever (9) (Fig. 5) to the position for the particular feed rate required. It is not 

necessary to stop the feed motor when changing the feed rate. 

“WARNING” 

1.

 

Don’t change feeding speed if the table is moving. 

2.

 

Before stopping the spindle or when the table auto feed is not used push back the feed 

engagement lever (4) (5) (6) (Fig. 5) to neutral. 

3-7-6 Operation of rapid traverse

 

This can be operated on any of the foregoing movements by having the fees motor running 

which is independent of the main spindle motor and moving the lever whichever direction 

engages the feed required into the correct position and then moving lever (11) (Fig. 5) 

upwards until the appropriate distance has been moved. Then lever (11) (Fig. 5) should be 

returned to its neutral position. 

 

 

Chung Sing 13

VERSION: 2

Summary of Contents for UH-3



























Reviews: