8
BEFORE OPERATION
*
Before operating your new oven, make sure you read
and understand this operation manual completely.
1) Plug in the oven.
*The digital display will then show “ . “
2) You can input the pads only when the door is closed.
3) Oven light and fan motor work for 1 minute whenever
the door is opened or after cooking.
MEMORY OPERATION
Memory Cooking
* Before Memory cooking, make sure memory is set.
See the way of memory program entry on page XX.
* Memory cooking can be set 5 operating ways.
Make sure what operating way is pre-prorammed, before
setting the Memory cooking because the way to enter
memory number depends on the previous Setting.
* These models have 100 memory banks from 00 to 99
and the memory number from 00 to 29 is common to 5
operating ways (Direct Start has 10 memory banks).
<5 operating ways>
1.
Direct Input of Auto Start OFF (memory 00 - 99)
2.
Direct Input of Auto Start ON (memory 00 - 99)
3. Repeat Input of Auto Start OFF (memory 0 - 29)
4. Repeat Input of Auto Start ON (memory 0 - 29)
5. Direct Start (memory 0 - 9)
NOTES for MEMORY COOKING
First Procedure :
When “ 0 “ is not displayed, open the door and close
it to set Direct Input of Auto Start ON, Direct Start, or
Repeat Input of Auto Start ON.
Cancellation :
1. The cooking data is canceled when key is not input
more than 1minute during setting memory cooking.
2. Express Defrost sequence cooking is stopped
immediately when the door is opened.The cooking
data remains but it will be canceled after 1 minute if
you do not operate anything.
3. The cooking is stopped by pressing the STOP/CLEAR
pad and the cooking data remain. However it will
be canceled after 1 minute if you do not operate
anything.
Checking food :
Pressing the STOP/CLEAR pad then open the door, check
food, close the door and press the START pad.
the START pad :
When Direct Input of Auto Start ON, Direct Start, Repeat
Input of Auto Start ON and Cooking double/triple quantity
with the memory of Auto Start ON are pre-prorammed
you do not have to press the START pad. You need press
the START except them.
2. Direct Input of Auto Start ON (with the Start pad)
* Suppose you want to cook with memory 12, which was
programmed for 10 seconds at 100%.
3. Repeat Input of Auto Start OFF (with the Start pad)
*Suppose you want to cook with memory 2,
which was programmed for 10 seconds at 100%.
Procedure
1 Place food in the oven.
Enter memory number.
1
2
4. Repeat Input of Auto Start ON
* Suppose you want to cook with memory 12, which
was programmed for 10 seconds at 100%.
Procedure
1 Place food in oven.
Enter memory number.
2
x 2
Procedure
2
START
2 Press the START pad.
1 Place food in oven.
Enter memory number.
1. Direct Input of Auto Start OFF (with the Start pad)
* Suppose you want to cook with memory 2,
which was programmed for 1 minute at 100%.
Procedure
0
2
START
2 Press the START pad.
1 Place food in oven.
Enter memory number.
5. DIRECT START (without the Start pad)
Suppose you want to cook with memory 2,
which was programmed for 10 seconds at 50%.
Procedure
2
1 Place food in oven.
Enter memory number.
