14
NOTE :
Press the STOP/CLEAR pad to exit from
the Custom Help function.
To Clear the total used air intake fi lter time
Clear the total used air intake fi lter time after
cleaning the air intake fi lter.
*
Suppose you want to clear the total used air
intake fi lter time. In that case the air intake fi lter
was used 101 hours and the limit time for using
the air intake fi lter is preset to 100.
1 Press the CUSTOM HELP
pad twice within 2 seconds
and enter 8, 1.
Procedure
Display
CUSTOM
HELP
x 2
8
1
After about 1 sec.
CHECK
NOTE :
Press the STOP/CLEAR pad to exit from
the Custom Help function.
Procedure
Display
1 Press the CUSTOM
HELP pad twice within
2 seconds and enter 8,1.
2 Press the START pad.
x 2
8 1
CUSTOM
HELP
After about 1 sec.
CHECK
START
10. Multiplication Check/Set for the x2/x3.
The multiplication factors of the double and triple
quantities for memory cooking are preset 1.80
and 2.60. You can check or change the multipli-
cation factors.
* Suppose you want to know the multiplication
factor for double quantity in memory 1, and
change it to 2.00 pre-programmed Direct
Input.
9. Selecting Operation in case of Magnetron
Failure
Your oven has 2 magnetrons.
You can select the operation when one magnetron
fails.
CH91 : Your oven does not work when one
magnetron fails = Factory setting
CH92 : Your oven works even if one magnetron
fails.
To set the ways
Press the CUSTOM HELP pad twice within 2
seconds
then enter the number
9, 1 for stopping the oven operation
9, 2 for allowing the oven to work
and then press the START pad and the STOP/CLEAR
pad to exit from the Custom Help function.
To change the limit time
You can change the limit time of the Air Filter
Counter from 1 hour to 999 hours.
* Suppose you want to set the limit time to 250
hours.
Procedure
Display
2 Press the SELECT TIME pad.
3 Enter desired time.
(Ex : Enter 2, 5, 0
for 250 hours).
1 Press the CUSTOM
HELP pad twice within
2 seconds and enter 8, 2 .
SELECT
TIME
x 2
8 2
CUSTOM
HELP
2 5 0
After about 1 sec.
CHECK
NOTE :
Press the STOP/CLEAR pad to exit from
the Custom Help function.
4 Press the START pad.
Procedure
Display
START
Procedure
Display
2 Enter memory number.
3 Press the SELECT TIME pad.
1 Press the CUSTOM HELP
pad twice within 2 seconds
and press the DOUBLE/
TRIPLE
QUANTITY pad.
SELECT
TIME
x 2
0
1
CUSTOM
HELP
x2/x3
CHECK
After abut 1 sec.
CHECK
NO.
CHECK
NO.
CHECK
NO.
