Sharp Twin Touch R-CD1800M, Operation Manual, Page: 13 / 29

12
4. Volume Setting
There is a choice of 2 different sound volumes and
mute on your oven.
Custom Help41 : High = Factory Setting
Custom Help42 : Medium
Custom Help43 : mute
To set cooking completion sound volume
Press the CUSTOM HELP pad twice within 2 seconds
then enter the number 4, 1 for High
4, 2 for medium
4, 3 for no sound
and then press the START pad and the STOP/
CLEAR pad to exit from the Custom Help function.
NOTE: The oven beeps high sound when an
error occurs despite depending on the selected
sound volume setting.
5. Cooking Completion Signal Setting
There is a choice of 4 different signals on your
oven.
CH51 : 1beep = Factory setting
CH52 : Repeat Long beeps
CH53 : 4 short beeps
CH54 : Repeat Short beeps
To set the ways
Press the CUSTOM HELP pad twice within 2
seconds
then enter the number 5, 1 for 1 beep
5, 2 for repeating Long
beeps
5, 3 for 4 short beeps
5, 4 for repeating Short
beeps
and then press the START pad and the STOP/CLEAR
pad to exit from the Custom Help function.
6. Memory Cook Data Check
You can check the information programmed into
the memory.
* Suppose you want to know the information
programmed into the momory 1, programmed
for 4 minutes at 60% for the 1st stage and 2
minutes at 30% at the 2nd stage pre-programmed
Direct Input.
Procedure Display
2 Enter memory number.
1
0
After about 1 sec.
(The Memory setting
of each phase is shown
for 1.5 seconds per
0.3 second till being
p r e s s e d t h e S T O P /
CLEAR pad.)
DEF CHECK
CHECK
CHECK
CHECK
CHECK
CHECK
STOP
CLEAR
3 Press the STOP/CLEAR pad
to excit from the Custom Help
function.
CHECK NO.
Procedure Display
1 Press the CUSTOM
HELP pad twice within
2 seconds and enter 6.
CUSTOM
HELP
x 2
6
CHECK NO.
CHECK
NOTE :
1. Press the STOP/CLEAR pad to exit from the
Custom Help function.
2. When is displayed at step 2 the memory
is not set.
3. You can check the other memory information
c continuously until you press the STOP/CLEAR
pad.
4. The way to enter memory number depends
on the pre-programmed setting.
5. When Express Defrost is set in the memory,
and
are displayed repeatedly at step 2.
CHECK
7. Counter Check / Clear
Set counter to "0" before using oven for the fi rst
time. See next column.
Counter check
You can check total number of using times, times
of using each memory, times of using manual
cooking and times of using EXPRESS DEFROST.
Total count
Press the CUSTOM HELP pad
twice within 2 seconds, then
enter 7
To check for each counter, press each pad as
indicated below, after total count is appeared.