Sharp SX66NF8 Operation Manual Download

Page: 32 / 44

E 30

TV/VIDEO

With this button you can select either source of input for the
TV.

When

TV/VIDEO

is first pressed, the TV/Video menu

appears and TV mode changes to VIDEO mode. The
screen is displayed in the last VIDEO mode.

Press the corresponding

COLOUR

to select one of

the input sources, as indicated in the diagram.
If you press any

COLOUR

during VIDEO mode, the

TV/Video menu will appear again.

Each time the corresponding COLOUR is
pressed, AV-3/S AV-3 (S-VIDEO) change as
indicated below.

BLUE

: AV-3

S AV-3 (S-VIDEO)

The selected input will appear on the screen.

Press

TV/VIDEO

again, and you will exit the menu

and VIDEO mode will change back to TV mode.

CLOCK

Press the button to display the current time on the screen.

That this function operates only if the station you
are tuned to broadcasts a teletext signal.

Headphone jack

The headphone jack is located behind the door.

How to open the door:

Lift the projection at the lower right

of the door with your finger in the direction of the arrow.

Press

MENU

to see the MAIN menu.

Press

GREEN

to see the SOUND menu.

Press

GREEN

to select HEADPHONE VOLUME.

Adjust the headphone volume with

Volume UP/

DOWN

Caution:

To protect your ears, reduce the volume of
headphones before connecting them.

Make sure that you insert the headphone plug all the
way.

Press

MENU

to close the menu.

The SPATIAL EXPANDER effect cannot be
adjusted for the headphones.

Other Features

RED

GREEN

YELLOW

BLUE

TV/VIDEO

CLOCK

MENU

Volume
UP/DOWN

TV/Video menu

AV-1

COMPO

NENT

AV-3

S AV-3

BLUE

YELLOW

GREEN

RED

AV-2

Behind the door

SX66/76NF8(01-)new

02.10.22, 4:04 PM

Summary of Contents for SX66NF8













































Search results

Summary of Contents for SX66NF8

Reviews:

Related manuals for SX66NF8

Brands by name

Popular brands

Sharp SX66NF8, Operation Manual

Search results

Summary of Contents for SX66NF8

Reviews:

Related manuals for SX66NF8

Brands by name

Popular brands