Sharp SX66NF8 Page 23 Operation Manual Download

Page: 23 / 44

E 21

Audio Adjustments

Loudspeakers Sound Volume

Use

Volume UP/DOWN

to increase/decrease the volume

level. The volume indicator will appear on the screen.

To adjust the headphones volume, see the
SOUND menu on page 22.

SOUND MUTE

Press the button to mute the sound. “MUTE” appears on the
screen. Press the button again to turn the sound back on.

SOUND MODE

Press the button to change the sound mode for the
speakers. The sound mode will appear on the screen.

Depending on the sound transmission the sound
reproduction can be chosen as indicated below:

When the TV set is receiving a STEREO programme, the
TV selects STEREO automatically, and you can change:

STEREO

MONO

When the TV is receiving a BILINGUAL programme, the
TV selects DUAL CHANNEL A automatically, and you
can change:

DUAL CHANNEL A

DUAL CHANNEL B

DUAL CHANNEL A B

MONO

When the TV is receiving a MONO (NICAM) programme,
the TV set selects MONO NICAM automatically, and you
can change:

MONO NICAM

MONO (FM)

When the TV is receiving a MONO (FM) programme, the
TV set selects MONO automatically but the sound mode
cannot be changed.

See the

Sound Setting Mode

(page 22) to

change the sound mode for the headphones.

External source:

When you are watching the TV set

through the AV-1, AV-2 or AV-3 terminals, the Sound mode
button is not operative.

SOUND
MUTE

SOUND
MODE

Volume
UP/DOWN

MUTE

STEREO

MONO

SX66/76NF8(01-)new

02.10.22, 4:04 PM

Summary of Contents for SX66NF8













































Search results

Summary of Contents for SX66NF8

Reviews:

Related manuals for SX66NF8

Brands by name

Popular brands

Sharp SX66NF8, Operation Manual

Search results

Summary of Contents for SX66NF8

Reviews:

Related manuals for SX66NF8

Brands by name

Popular brands