The interior compartments of the refrigerator may become
hot when transporting in the case of hot weather.
Before turning on the power, cool the compartments by
opening the doors.
Electronic tones will sound when turning on the power with
the doors open. However, the tones will stop when the doors
are closed and operation will start momentarily.
Loud noise may be noticed at first; however, this is not a
malfunction.
The noise will soften as the compartments cool.
Adjust the clock of the LCD panel.
Adjusting the clock
Notes
Insert the power plug.
Current: 220 ~ 240V
Cord facing down
Insert securely
* First set the clock even after a power failure or removing the power plug.
1
2
3
Clean the inside parts with a
cloth soaked in warm water.
If soapy water is used, wipe it off
thoroughly.
Turn the dial to set the hour.
Clockwise:
AM0
→
AM1
→
AM2
・・・
Counterclockwise:
AM0
→
PM11
→
PM10
・・・
Turn the dial to set the minutes.
Clockwise:
00
→
01
→
02
・・・
Counterclockwise:
00
→
59
→
58
・・・
Press "CHOOSE/START".
(Beep)
1
2
Press "CHOOSE/START".
(Beep)
4
3
"--:--" will be displayed when not setting the time within 1 minute after inserting the power plug.
Errors cannot be corrected by returning to a previous step when setting the time.
Perform steps 1 ~ 4 and set the time again.
Notes
AM
AM
28
Before using your refrigerator
英語
(Time Setting 46 page)
