20
SJ-21P
SJ-D25P
Fig. A-22
2. As shown in Fig. A-23, pull the upper part of Evaporator
toward you, pull it diagonally so that the pipe of
Evaporator does not contact the convex part of food
liner.
4. DEFROST HEATER
(1) Taking-out Evaporator
1. Take out F-louver ass'y (Fig. A-22).
Evaporator
Food liner convex part
Food liner convex part
Evaporator
Pipe
Fig. A-23
3. As shown in Fig. A-24, bend the removed Evaporator
horizontally so that Defrost heater can be replaced
easily.
NOTE: When pulling Evaporator and bending the
pipes, pay attention so as not to break and
deform the pipes. Still, take care not to hurt
yourself by fin of Evaporator.
Fig. A-24
Evaporator
(2) Replacement of Def. heater ass'y.
1. Disconnect the lead wires inserted in the rib of center
partition (Fig. A-25 : 8 pcs.).
Def. heater L ass'y
Tape
Tape
Vinyl tape
Protrusion part of Drain support (2 pcs.)
Heater cover
Removing direction
Mounting direction
Def. heater ass’y
Fig. A-26
3. Open Def. heater fixed part of Drain support
(Fig. A-27) to the right and left, then remove
Def. heater ass'y.
Removing direction
Mounting direction
Drain support
Def. heater ass’y
Screw
Screw
Fig. A-27
Fig. A-25
2. Raise the protrusion part of Drain support AL
(Fig. A-26). Then remove Heater cover.
