17
SJ-21P
SJ-D25P
Fig. A-10
2. Insert the fasten terminal of Defrost thermo. ass'y
into the terminal of Fan motor. (2 pcs.)
Defrost thermo. ass'y has positive lock. (No. pole, so
changeable)
Check locking by pulling them with more than
10N(1kgf), all wires after assemble them.
NOTE
(1) Assemble so that terminal of Fan motor does not
deform.
(2) Take care not to stress to terminal of Fan motor after
wiring.
Sec. Length Center
Sec. Horizontal Center
Motor cover
Motor cover
A-sealer FM
A-sealer FM
A-sealer FM
A-sealer FM
Motor cushion
Motor cushion
Motor cushion
Fan motor
Fan motor
Motor holder
Motor cushion
Motor holder
1. Stick A-sealer FM to Motor holder.
0 ~ 1mm
Motor
holder
A-sealer
FM
start
finish
A
A
Sec. AA
Fig. A-12
4. Insert the wire of Defrost thermo. ass'y to the place
of " 3 " ass'y as shown in Fig. A-12.
5. Set Motor cushion and Motor cover to " 4 " ass'y as
shown Fig. A-13.
View from B
B
wire
" 2 "ass’y
" 1 "ass’y
3. Set Motor cushion and " 2 " ass'y to " 1 " ass'y.
Fig. A-11
Defrost thermo. ass'y
Fan motor
terminal
fasten terminal
Fig. A-13
6. Set Defrost thermo. ass'y to " 5 " ass'y as shown in
Fig. A-14.
" 5 " ass’y
C
C
Defrost thermo.
ass’y
D
D
before
after
Sec. CC
before
wires
Fastening band A
wires
after
Sec. DD
Insert
Thermostat sensing face (aluminum side)
should be fixed horizontally, lower side.
Insert
Fig. A-14
