8
MAKING COPIES
Auditing accounts
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not
function until an assigned 3-digit account number has been entered.
See page 37 for setting the auditing mode.
If the copier has been programmed in the auditing mode, “
––
” will
appear in the copy quantity display in the initial conditions.
1
Enter your account number using the 10-key pad.
●
As each digit is entered, the dashes in the copy quantity display
will disappear.
●
After the number is entered, the copy quantity display will
change to 0 and the START key indicator will light up.
●
If an unassigned number is entered, “
––
” will appear again in the
copy quantity display, indicating that the number was not
accepted.
2
When a copy run is completed, press the
key.
●
“
––
” will appear again in the copy quantity display, indicating the
auditing mode.
●
In the interrupt copy mode (see page 19), press the INTERRUPT
key after an interrupt copy run is completed.
1
2
3
4
5
6
7
0
C
8
9
LECT
CLEAR ALL
Summary of Contents for SF-2530
Page 88: ...86 OPTIONAL EQUIPMENT MEMO ...
Page 90: ...99C DSC3 CINSE1807FC51 ...
