E-54
SD-SH111(U)E6.fm
02/11/20
SD-SH111
ENGLISH
7
Ad
v
a
nced
F
e
atures
- Time
r a
n
d s
le
e
p
op
e
ra
tion -
To check the timer setting:
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the same setting,
perform the following operations.
Changing the timer setting:
Turn the power on, and repeat the operation from step 1 in "Setting the timer" (page
53).
Canceling the timer playback:
Timer playback is canceled by turning the power on while in the timer playback stand-
by mode. The same operation can be performed in the following procedure without
turning the power on.
Caution:
z
The contents of the setting will be erased if the unit is unplugged or a power failure
occurs. In such cases, set the timer again.
z
This unit cannot set the timer of other equipment.
z
When setting the timer playback using the digital tuner, TV, VCR, or the connected
equipment should be set to timer playback at the same time.
Note:
The timer operation is disabled with discs containing menus.
1
While in the timer playback stand-by mode,
press the TIMER button.
2
Within 10 seconds, press the or button to select "TIMER CALL", and press
the ENT button.
The unit returns to the timer playback stand-by mode after the setting contents
are displayed in order.
When the start time is reached:
Playback starts automatically and the volume increases gradually.
The timer playback indicator flashes.
Timer playback indicator
Timer setting indicator
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
1
Turn the power on and press the TIMER button.
2
Within 10 seconds, press the ENT button.
After the setting contents are displayed in order, the unit is set to the timer play-
back stand-by mode.
1
Press the TIMER button.
"TIMER CANCEL" will appear.
2
Within 10 seconds, press the ENT button.
Timer playback will be canceled (the contents of the setting will not be canceled).
