E-16
e2.fm
02/4/17
SD-EX100H
ENGLISH
2
3
4
5
6
7
8
1
Ra
dio
- Lis
te
n
ing
t
o
the
r
a
dio -
Listening to the radio
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "STEREO" indicator.
z
"ST" will appear when an FM broadcast is in stereo.
z
If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"STEREO" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING ( or ) button to tune in to the desired station.
Manual tuning:
z
Press the TUNING button as many times as required to tune in to the desired sta-
tion.
Auto tuning:
z
When the TUNING button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
z
You can tune in to the desired station by pressing the
or
button on the re-
mote control.
Notes:
z
When radio interference occurs, auto scan tuning may stop automatically at that
point.
z
Auto scan tuning will skip weak signal stations.
z
When an RDS (Radio Data System) station is tuned in, the frequency will be dis-
played first, and then the RDS indicator will light. Finally, the station name will ap-
pear.
z
Full auto tuning can be achieved for RDS stations "ASPM", see page 20.
z
To stop the auto tuning, press the TUNING button again.
FM stereo receiving indicator
FM stereo mode indicator
Downloaded from:
