Sharp SD-AS10, Service Manual

Page: 10 / 188

SD-AS10
2 – 4
PL: * MH: *
UL: * LK: *
DR: *
MO: *
DH: drum cam home
DP: drum cam position
LO: load sw
MP: mode cam position
MO: mode cam encoder pluse
SH: shutter sw
PL: play sw
MH: mode cam home sw
UL: unload sw
LK: drum cam encorder pluse
DR: drum motor
MO: mode motor
10. Aging Mode 1 (Full operation test)
During stand-by press DISC1+FPOWER button.
Then press DISC1 button.
Button:
1) Normal: D1-D5, OPEN/CLOSE, PLAY, STOP, POWER
2) Aging: PLAY, STOP, POWER
Other button invalid.
All remocon button invalid.
Changer LED function as normal.
V/H sw function as normal.
Error detect function as normal.
1. If press STOP button, aging process stop and counter display as
last number.
2. If press PLAY button, counter reset to “00000” and aging process
start from first process.
3. If press POWER button, cancel test mode, then power off process.
4. If error occur, aging process stop, counter display as last number
and display error.
Aging Display Explanation
(1) DISC
Show the aging process (refer flow chart).
If error occur during the process, ERR** will be display.
(2) ACT
Show the changer process (refer DH018).
*Changer display same as page DI-7-1.
Can use D1-D5 and OP/CL button as normal.
*Counter display:
Test name.
No Counter.
Error. Only if error occur.
Yes
(All character is in 5x7)
*Process continue unless
press STOP button.
* "n" is disc number.
Default n = 1.
If n = 5, return to D1 Eject process
*Default "00000".
After "99999" go to "00000".
AGING4
ERROR CARRY
00000
Changer Initial Process
(Changer display)
PLAY
button
Changer Initial Process
(Counter display)
Disc "n" Eject
Disc "n"
to chuck
Disc "n+1"
Load
Disc "n"
to Magazine
n = n+1
Counter up
Wait 1sec
Start
Disc "n+1" Eject
AGING 1
←
Test Mode name
00000
←
Counter display
ERROR CARRY
←
Error display
DISC :
←
(1)
MODE :
←
Mode cam No.
DRUM :
←
Drum cam No.
ACT :
←
(2)
Operation
Display
Normal Error
Eject with no disc chucking EJECT ERR13
From magazine to play CHUCK ERR15
Eject with disc chucking EJECT ERR17
Loading LOAD ERR19
From play to magazine TO MG ERR1B
Operation Display
Eject with no disc chucking 1*
Eject with disc chucking 2*
Load with no disc chucking 3*
Load with disc chucking 4*
From play to magazine 5*
From magazine to play 6*
Drum go to LD/EJ position D*
Drum go to PLAY position A*/C*