background image

5

LED TV

Important Safety 

Instructions

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance 
with the manufacturer's instructions.

8

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10

Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.

11

Only use attachments/accessories specified by the 
manufacturer. 

12

Use only with the cart, stand, tripod, bracket, 
or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over. 

13

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

14

Refer all servicing to qualified service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

15

The 

wall plug 

is the disconnecting device. The plug must 

remain readily operable.

16

Remote control batteries should not be exposed to 
excessive heat such as sunshine, fire, or the like.

17

The apparatus should not be exposed to dripping or 
splashing, and no objects filled with liquids, such as vases, 
should be placed on the apparatus.

18

Your TV has four VESA mounting holes on the back. If you 
attach a wall-mount bracket or TV stand to the back of your 
TV, 

the bracket or stand must be securely attached 

using all four holes

. If you do not use all four mounting 

holes, your TV may fall and cause property damage or 
personal injury. See the documentation that came with 
your wall mount or TV stand for complete mounting 
instructions.

WARNING

Electric shock hazard

To reduce the risk of fire or electric shock, do not remove any 
cover or expose the device to rain or moisture. No 
user-serviceable parts are inside. Refer servicing to qualified 
service technicians.

Lightning

For added protection for your device receiver during a 
lightning storm, or when it is left unattended and unused for 
long periods of time, unplug it from the power outlet and 
disconnect any antenna or cable system. This helps prevent 
property damage and personal injury from lightning and 
power line surges.

Power lines

An outside antenna system should not be located in the 
vicinity of overhead power lines or other electric light or power 
circuits, or where it can fall into such power lines or circuits. 
When installing an outside antenna system, take extreme care 
to keep from touching such power lines or circuits as contact 
with them might be fatal.

Handling the LCD panel

• Your TV’s screen is made of glass. Do not drop your TV or 

hit, jolt, or press hard against the LCD panel. If the screen 
breaks, be careful of broken glass. 

• If the LCD panel is broken, make absolutely sure that you do 

not touch the liquid in the panel. This may cause skin 
inflammation. 

• If the liquid gets in your mouth, immediately gargle, rinse, 

and consult with your doctor. Also, if the liquid gets in your 
eyes or touches your skin, consult with your doctor after 
rinsing for at least 15 minutes or longer in clean water. 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that 
dangerous voltage 
constituting a risk of electric 
shock is present within your TV. 
This label is located on the 
back of your TV.

This symbol indicates that 
there are important operating 
and maintenance instructions 
in the literature accompanying 
your TV.

This symbol indicates that this 
product incorporates double 
insulation between the 
hazardous main voltage and 
user accessible parts. When 
servicing, use only identical 
replacement parts.

Summary of Contents for Roku LC-75LBU711C


































Reviews: