Sharp PN-V601, Installation Manuallines

Page: 7 / 47

CONFIDENTIAL
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
6
Space requirement 1
Top 20
ｃｍ
Bottom 10
ｃｍ
Left/
Right
10
ｃｍ
Behind Clearance space and surrounding
temperature should be maintained (refer to
next page)
Surface Consult us separately
Temperature control and clearance space conditions
PN-V601(Main unit), PN-ZR01(Remote-control signal
receiving kit) temperature condition requirement
- Usable temperature range
0 degree C to 40 degree C *
*: Maximum temperature when multi-display system is operating
- Clearance space
1)Space should be taken between front/ back/
above/ below/right/left side of the display
2) Due to configurations of multi-display and
clearance space at the back side,
surrounding temperature must be carefully
controlled.
- Temperature of LCD surface
Under 60 degree C
Please follow these requirements when setting multi- display.
Refer to the measures and install the display according to its
requirements. (Same with peripheral devices, please follow the
specifications )
Securing space at the Top/ Bottom/ Left/ Right/ Behind /
Surface of display is necessary regardless of wall-hanging or
stand type installation.
A point for measuring temperature
Please measure the temperature at 1m away from the
centre of LCD surface.
Surface of LCD multi-display
1m
Side view
Precautions for temperature and clearance space 2
Note: However, please separately inquire in following cases:
1)when you install with outer casing, 2)When using protection panel,
or 3) Closed installation like In-wall installation, etc. that
surroundings are not opened.