Sharp PN-V550A Page 65 Operation Manual Download | Manualshive

Page: 65 / 66

background image

65

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

Screws (M6)
Mounting bracket
Monitor mounting

5/16 - 3/8 inch (8-10 mm)

• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the handles (do not hold the top, bottom, or sides of the monitor). Do not

hold the LCD panel. Also, do not orient the monitor so that the LCD panel faces the ground. This may cause product damage,
failure, or injury.

•  When performing an installation where the monitor is stacked, please install it such that load is not placed on the monitor.
•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•  Do not use any screw holes other than VESA holes for installation.

Mounting Precautions

(For SHARP dealers and service engineers)

«
...
63
64
65
66
»

Summary of Contents for PN-V550A



































































Reviews:

No comments

Related manuals for PN-V550A

SyncMaster 1200NF

Brand: Samsung Pages: 30

SyncMaster 172W

Brand: Samsung Pages: 45

SyncMaster 2032GWPlus

Brand: Samsung Pages: 62

SyncMaster 2033SN

Brand: Samsung Pages: 91

SyncMaster 1100MB

Brand: Samsung Pages: 62

SyncMaster 171B, 171S, 181B, 171T, 171Q

Brand: Samsung Pages: 83

SyncMaster SM320MX-2

Brand: Samsung Pages: 109

T200HD - SyncMaster - 20" LCD Monitor

Brand: Samsung Pages: 27

SyncMaster TC180

Brand: Samsung Pages: 2

T220HD - SyncMaster - 22" LCD Monitor

Brand: Samsung Pages: 88

Brand: Samsung Pages: 241

SyncMaster XL2270

Brand: Samsung Pages: 43

SyncMaster S24A460B

Brand: Samsung Pages: 44

SyncMaster S22A300N

Brand: Samsung Pages: 48

SyncMaster S27A850D

Brand: Samsung Pages: 89

SyncMaster S22A650D

Brand: Samsung Pages: 94

SyncMaster S22A650S

Brand: Samsung Pages: 95

SyncMaster S19C450BR

Brand: Samsung Pages: 125

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands