26
E
RS-232C command table
How to read the command table
Command:
Command field (See page 24.)
Direction:
W When the “Parameter” is set in the parameter field (See page 24.), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “
?” or “???+”
(repeater control) in the parameter field. (See page 24.)
Parameter:
Parameter field (See page 24.)
Reply:
Response (Returned value)
*:
“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.
“○” indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.
“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.
Power control/Input mode selection
Function
Command Direction
Parameter
Reply
Control/Response contents
*
POWER CONTROL
POWR
W
0
Switches to standby mode.
●
1
Returns from standby mode.
R
0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION
INPS
W
0
Toggle change for input mode. Terminals not selected in INPUT SELECT cannot
be selected.
●
9
HDMI1 [AV]
“ERR” when PC is selected for HDMI1 of INPUT SELECT.
10
HDMI1 [PC]
“ERR” when AV is selected for HDMI1 of INPUT SELECT.
12
HDMI2 [AV]
“ERR” when PC is selected for HDMI2 of INPUT SELECT.
13
HDMI2 [PC]
“ERR” when AV is selected for HDMI2 of INPUT SELECT.
14
DisplayPort
15
HDMI DUAL
R
9 HDMI1 [AV]
●
10 HDMI1 [PC]
12 HDMI2 [AV]
13 HDMI2 [PC]
14 DisplayPort
15 HDMI DUAL
Controlling the Monitor with a PC (RS-232C)
Summary of Contents for PN-K321
Page 1: ...PN K321 LCD MONITOR OPERATION MANUAL ...
Page 37: ...PN K321 Mu EN13A 1 ...
