background image

2

E

IMPORTANT INFORMATION (Continued)

WARNING:

 

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the 

manufacturer could void the user’s authority to operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 

to correct the interference at his own expense.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of 

these materials may be regulated due to environmental considerations.

For disposal or recycling information, please contact your local authorities, the Electronics Industries Alliance:

www.eiae.org, the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP

(For U.S.A. Only)

This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may 

apply, California residents, See www.dtsc.ca.gov/hazardouswaste/perchlorate/

U.S.A. ONLY

A. Information on Disposal for Users (private households)

1. In the European Union

Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin! 
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper 

treatment, recovery and recycling of used electrical and electronic equipment. 

Following the implementation by member states, private households within the EU states may return their used electrical and 

electronic equipment to designated collection facilities free of charge*.  In some countries* your local retailer may also take 

back your old product free of charge if you purchase a similar new one. 
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand 

according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and 

recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due 

to inappropriate waste handling.

2. In other Countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t 

purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.

B. Information on Disposal for Business Users

1. In the European Union

If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the 

costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection 

facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.

Attention:

 Your product is marked with this symbol. It means that used electrical and electronic products 

should not be mixed with general household waste. There is a separate collection system for these products.

Summary of Contents for PN-E421

















Reviews: