background image

3

E

IMPORTANT INFORMATION

WARNING:

  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT 

TO RAIN OR MOISTURE.

RISK OF ELECTRIC 

SHOCK

DO NOT OPEN

CAUTION

CAUTION:   TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER. 

NO USER-SERVICEABLE PARTS 

INSIDE. 

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within 

a triangle, is intended to alert the user to the 

presence of uninsulated “dangerous voltage” 

within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electric 

shock to persons.

The exclamation point within a triangle is 

intended to alert the user to the presence of 

important operating and maintenance (servicing) 

instructions in the literature accompanying the 

product.

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the 
terminals in your plug proceed as follows:

• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the 

letter 

E

 or by the safety earth   or coloured green or green-and-yellow.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 

N

 or coloured black.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 

L

 or coloured red.

Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

Summary of Contents for PN-80TC3A






































































Reviews: