Sharp PN-80TC3A Page 53 Operation Manual Download

Page: 53 / 69

5. Click on “LAN SETUP” under NETWORK.

6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

7. When the setting is changed, click [Apply].

8. Check the message and click [OK].

9. Exit Internet Explorer.

10. Restore the PC’s IP address jotted in Step 6, “(2)

Specifying the PC’s IP address”.

11. Connect the monitor and the PC to the LAN.

TIPS

• Wait 10 seconds after clicking [OK] before proceeding.

• When operating using the remote control unit or similar,

click [Refresh].

Controlling with a PC

TIPS

• For security, set a USER NAME and PASSWORD.

(See

page 55.)

Basic operation

You use Internet Explorer on a PC on the LAN to control the

monitor.

1. Launch Internet Explorer on the PC.

2. In the “Address” box, type “http://” followed by your monitor’s

IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the DISPLAY function.

When prompted to enter a USER NAME and PASSWORD,

type the user name and password that you specified in the

SECURITY settings (see page 55.), and click [OK].

3. You can check, control, and change the monitor’s status

and settings by clicking the menu items on the left side of

the screen.

• If you see an [Apply] button next to a setting, click it after

you change that setting.

TIPS

• See pages 54 to 58 for details on each setting.

• If you click [Refresh] before the screen finishes updating

the current display, the “Server Busy Error” will appear.

Wait for a moment before operating your monitor again.

• You cannot operate the monitor while it is warming up.
• If DHCP CLIENT is set to ON, press

DISPLAY

on the remote

control unit two times and then check the monitor’s IP

address.

Controlling the Monitor with a PC (LAN)

Summary of Contents for PN-80TC3A






































































Search results

Summary of Contents for PN-80TC3A

Reviews:

Related manuals for PN-80TC3A

Brands by name

Popular brands

Sharp PN-80TC3A, Operation Manual

Search results

Summary of Contents for PN-80TC3A

Reviews:

Related manuals for PN-80TC3A

Brands by name

Popular brands