44
E
Specifications
n
Product Specifications
Model
PN-86HC1
PN-75HC1
LCD component
86" Class
[85-9/16 inch (217.4 cm) diagonal] TFT LCD
75" Class
[74-1/2 inch (189.3 cm) diagonal] TFT LCD
Max. resolution
(pixels)
3840 x 2160
Max. colors
Approx. 1.07 billion colors
Pixel pitch
0.4935 mm (H) × 0.4935 mm (V)
0.4296 mm (H) × 0.4296 mm (V)
Brightness (typical)
400 cd/m
2
*
1
Contrast ratio (typical)
1200: 1
Viewing angle
178
° right/left/up/down (contrast ratio ≥ 10)
Screen active area
inch (mm)
74-5/8 (W) x 41-15/16 (H)
(1895.0 x 1066.0)
64-15/16 (W) x 36-9/16 (H)
(1649.7 x 927.9)
Computer input signal
Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal
Horizontal/vertical separate (TTL: positive/negative)
Plug and play
VESA DDC2B
Input
terminals
Video
Mini D-sub 15 pin, 3 rows x 1
HDMI x 3
Mini AV in x 1
Mini YPbPr x 1 (Component)
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
Output
terminals
Audio
3.5 mm mini stereo jack x 1
Digital audio output (optical) x 1
System CPU
Arm Cortex - A53 processor (quad core)
Memory
1GB
Storage
8GB
LAN terminal
10BASE-T/100 BASE-TX (Wake on LAN only)
Wireless LAN
IEEE802.11ac/n/a/g/b compliant (When a wireless adapter is connected)
USB
2.0 compliant (Type A) x 3
Expansion slot
19 V, 4.74 A
(power supplied when expanding the functions with an optional part)
Speaker output
10 W + 10 W
Touch
Panel
Detection method
Infrared blocking detection method
Computer connector
USB (2.0 compliant) (Type B) x 2
Power requirement
AC 100 - 240 V, 5.9 A, 50/60 Hz
AC 100 - 240 V, 5.2 A, 50/60 Hz
Operating temperature *
2
*
3
41°F to 95°F (5°C to 35°C)
Operating humidity *
3
20% to 80% (no condensation)
Power consumption *
4
(standby mode *
5
)
530 W (0.5 W)
460 W (0.5 W)
Dimensions
inch (mm)
(excluding protrusions)
Approx. 78-1/4 (W) x 4-7/16 (D) x 46-1/4 (H)
(1988 x 113 x 1175)
Approx. 68-5/16 (W) x 4-1/8 (D) x
40-13/16 (H) (1735 x 105 x 1036)
Weight
lbs. (kg)
Approx. 176.4 (80)
Approx. 134.5 (61)
*1
Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel, not the
brightness of the product.
*2
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*3
In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*4
When an option is installed in the expansion slot. When an option is not installed, PN-86HC1: 420 W, PN-75HC1: 360 W.
*5
When Power Save Mode is set to On.
When Power Save Mode is set to Off, and no optional part is attached: 2.0 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.