manualshive.com logo in svg

Sharp PN-75HC1, Operation Manual, Page: 16 / 52

Share
Download
Sharp PN-75HC1 Operation Manual Download Page 16

16

E

Caution

•  Turn on the monitor first before turning on the computer or 

playback device.

•  When switching the main power switch or the POWER 

button off and back on, always wait for at least 5 seconds. 

A short interval may result in a malfunction.

Turning on the main power

Main power switch

When you turn on the main power, the monitor enters standby 

mode.

Caution

•  The main power must be turned on/off with the main power 

switch. Do not connect/disconnect the power cord or turn 

the breaker on/off while the main power switch is on.

•  For a complete electrical disconnection, pull out the main 

plug.

Turning Power On/Off

Turning power on/off

Press the POWER button to turn the power ON/OFF.

You can also turn the power ON/OFF by pressing the 

MONITOR ON button/MONITOR OFF button on the remote 

control unit.

Power LED POWER button

Status

Status of the monitor

Blue lit

Power on

Red lit

Power off (Standby mode)

TIPS

•  When the monitor is turned on for the first time after being 

shipped from the factory, the settings screen appears.

•  When the main power switch is off, the monitor cannot be 

turned on.

n

Operation mode

When the monitor is turned on for the first time after being 

shipped from the factory, the operation mode setting screen 

will be displayed. Set it to Mode1 or Mode2.

Mode1......Off If No Operation is set to On, and Power Save 

Mode is set to On. (These settings can not be 

changed.) 

If there is no operation for 4 hours or more, the 

monitor automatically enters standby mode. Power 

consumption in standby mode is also minimized.

Mode2......Will perform standard operation. 

Off If No Operation is set to Off, and Power Save 

Mode is set to Off. These settings can be changed.

Even after being set, changes can be made using Operation 

Mode, located in the menu of the monitor. (See page 33.)

Summary of Contents for PN-75HC1





















































Reviews:

No comments