-20
Connecting to a
Computer Using a DIN-D-
sub RS-232C Adaptor
and an RS-232C Serial
Control Cable
When the RS-232C terminal on the projector is
connected to a computer with a DIN-D-sub RS-
232C adaptor and an RS-232C serial control
cable (cross type, commercially available), the
computer can be used to control the projector
and check the status of the projector. See page
61
for details.
1
Connect a DIN-D-sub RS-232C
adaptor to an RS-232C serial
control cable (commercially
available).
2
Use the above cables to connect
the projector and the computer.
Note
•
Do not connect or disconnect an RS-232C
serial control cable to or from the computer
while it is on. This may damage your com-
puter.
•
The RS-232C function may not operate if
your computer terminal is not correctly set
up. Refer to the operation manual of the
computer for details.
•
See page
60
for connection of an RS-232C
serial control cable.
To RS-232C terminal
Computer
RS-232C serial
control cable
(commercially
available)
DIN-D-sub
RS-232C
adaptor
Controlling the Projector Using a Computer
Connecting the Projector to Other Devices
DIN-D-sub
RS-232C adaptor
Supplied
accessory
PG-A15X_E_PDF_P18_20.p65
10/17/04, 11:36 AM
20
Summary of Contents for PG-A10X-A
Page 74: ...SHARP CORPORATION ...
