Sharp PC-9300 Manual Download Page 35

Page: 35 / 103

3-3

When you select this option, any changes you have made to the field values are
discarded and the notebook restarts using the old values.

Get Default Values

When you select this option, the notebook loads the default field values. The
notebook does not restart. You must use the

Save Changes & Exit

option to restart

the notebook using the default values.

Load Previous Values

When you select this option, any changes you have made to the field values are
discarded. The notebook does not restart. You must use the

Save Changes & Exit

option to restart the notebook using the old values.

Save Changes

When you select this option, any changes you have made to the field values are
saved. The notebook does not restart. You must use the

Save Changes & Exit

option to restart the notebook using the new values.

Summary of Contents for PC-9300








































































































Search results

Summary of Contents for PC-9300

Reviews:

Related manuals for PC-9300

Brands by name

Popular brands

Sharp PC-9300, Manual

Search results

Summary of Contents for PC-9300

Reviews:

Related manuals for PC-9300

Brands by name

Popular brands