Sharp Notevision XR-10S, Operation Manual

Page: 68 / 71

64
Projector
XG-MB65X-L/XG-MB55X-L/XR-10X-L/XR-10S-L
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480
I /DTV480P/
DTV540P/DTV576
I
/DTV576P/DTV720P/DTV1035
I
/DTV1080
I
/DTV1080
I
-50
Single Chip Digital Micromirror Device
TM
(DMD
TM
) by Texas Instruments
Panel size: [XG-MB65X-L/XG-MB55X-L/XR-10X-L] 0.55
"
(14 mm), 1chip XGA DMD
[XR-10S-L] 0.55
"
(14 mm), 1chip SVGA DMD
No. of dots: [XG-MB65X-L/XG-MB55X-L/XR-10X-L] 786,432 dots (1,024 [H]
×
768 [V])
[XR-10S-L] 480,000 dots (800 [H]
×
600 [V])
[XG-MB65X-L] 1–1.15
×
zoom lens, F2.4–2.6, f = 18.7–21.5 mm
[XG-MB55X-L/XR-10X-L/XR-10S-L] 1–1.15
×
zoom lens, F2.4–2.6, f = 19.0–21.9 mm
[XG-MB65X-L/XG-MB55X-L] 275 W DC lamp (AN-XR20L2)
[XR-10X-L/XR-10S-L] 220 W DC lamp (AN-XR10L2)
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
[XG-MB65X-L/XG-MB55X-L/XR-10X-L] 600 TV lines (DTV720P)
[XR-10S-L] 520 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
45–85 Hz
15–70 kHz
12–108 MHz
9-pin mini DIN connector
ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 k
Ω
(stereo)
ø3.5 mm minijack: 0.5 Vrms, less than 2.2 k
Ω
4 cm
×
2.85 cm oval
×
1
AC 100–240 V
[XG-MB65X-L/XG-MB55X-L] 3.6 A
[XR-10X-L/XR-10S-L] 3.0 A
50/60 Hz
XG-MB65X-L 350 W (“Bright” mode)/280 W (“Eco + Quiet” mode) with AC 100 V
XG-MB55X-L 330 W (“Bright” mode)/270 W (“Eco + Quiet” mode) with AC 240 V
XR-10X-L
298 W (“Bright” mode)/229 W (“Eco + Quiet” mode) with AC 100 V
XR-10S-L 288 W (“Bright” mode)/223 W (“Eco + Quiet” mode) with AC 240 V
4.7 W (AC 100 V) – 6.1 W (AC 240 V)
XG-MB65X-L 1,315 BTU/hour (“Bright” mode)1,050 BTU/hour (“Eco + Quiet” mode) with AC 100 V
XG-MB55X-L 1,240 BTU/hour (“Bright” mode)/1,010 BTU/hour (“Eco + Quiet” mode) with AC 240 V
XR-10X-L
1,120 BTU/hour (“Bright” mode)/860 BTU/hour (“Eco + Quiet” mode) with AC 100 V
XR-10S-L 1,080 BTU/hour (“Bright” mode)/840 BTU/hour (“Eco + Quiet” mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12
13
/
32
"
×
4
19
/
64
"
×
11
1
/
32
"
(315 (W)
×
109 (H)
×
280 (D) mm) (main body only)
12 13 /
32
"
×
4 47 /
64
"
×
11 37 /
64
"
(315 (W)
×
120 (H)
×
294 (D) mm) (including adjust-
ment foot and projecting parts)
8.6 lbs. (3.9 kg)
Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe,
except U.K., Power cord for U.K. and Singapore, Power cord for Australia, New
Zealand and Oceania, RGB cable, DIN-D-sub RS-232C adaptor, Operation
manual (Printed and CD-ROM), Dust filter
Specifications
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input
(INPUT 1/2)/output
(OUTPUT) signal
S-video input signal
(INPUT 3)
Video input signal
(INPUT 4)
Vertical frequency
Horizontal frequency
Pixel clock
RS-232C terminal
Audio input signal
Audio output signal
(AUDIO OUTPUT 1-4)
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption
(standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.