Sharp Notevision XG-C58X, Service Manual

Page: 2 / 172

2
XG-C58X
XG-C68X
Specifications
LCD Projector
XG-C58X/XG-C68X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
LCD panel X 3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H] X 20 [W] mm)
No. of dots: 786,432 dots (1,024 [H] X 768 [V])
1–1.27 X zoom lens, F1.7–2.2, f = 36.5–46.3 mm
SHP 310 W (Lamp unit: AN-C55LP)
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
4-pin B-type USB female connector
9-pin mini DIN connector
15–126 kHz
43–200 Hz*
12–230 MHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 k
Ω
(stereo)
3.0 W (monaural)
4 cm X 7 cm
AC 120–240 V
3.4 A
50/60 Hz
405 W (Standard mode)/320 W (Low power mode) with AC 120 V
390 W (Standard mode)/315 W (Low power mode) with AC 240 V
0.5 W (AC 120 V) – 0.9 W (AC 240 V) (When “Mntr.out/RS232” is set to “OFF”)
1,522 BTU/hour (Standard mode)/1,202 BTU/hour (Low power mode) with AC 120 V
1,465 BTU/hour (Standard mode)/1,183 BTU/hour (Low power mode) with AC 240 V
41
° F to 95 ° F (+5 ° C to +35 ° C)
–4 ° F to 140 ° F (–20 ° C to +60 ° C)
Plastic
38 kHz
15
3 ⁄
8
" X 3 7 ⁄
8
" X 11 9 ⁄
16
" (390 (W) X 99 (H) X 294 (D) mm) (main body only)
15
1
⁄
2
" X 4
7
⁄
16
" X 11
5
⁄
8
" (393 (W) X 114 (H) X 303 (D) mm) (including adjustment foot
and projecting parts)
11.5 lbs. (5.2 kg)
Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe, except U.K., Power
cord for U.K. and Singapore, RGB cable, USB cable, DIN-D-sub RS-232C adaptor, Air filter, Lens
cap, Projector manual and technical reference CD-ROM, Quick guide label, Operation manual
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
USB terminal
Computer control signal (RS-232C)
Horizontal frequency
Vertical frequency
Pixel clock
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
As a part of policy of continuous improvement, SHARP reserves the right to make design and speci-
fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.