Sharp Notevision PG-D40W3D, Operation Manual

Page: 36 / 69

32
Operating with the Remote Control
POINTER button
ECO+QUIET button
Adjustment buttons
(
P
/
R
/
O
/
Q
)
BREAK TIMER button
SPOT button
AUTO SYNC button
FREEZE button
PICTURE MODE button
MAGNIFY buttons
EFFECT button
Displaying and Setting the
Break Timer
1
Press BREAK TIMER .
The timer starts to count down from 5
minutes.
On-screen display
2
Press
P
/
R
/
O
/
Q
to adjust the
length of the break time.
Increases with
P
or
Q
5 minutes
➞
6 minutes
➞
60 minutes
Shortens with
O
or
R
4 minutes
➞
3 minutes
➞
1 minute
The break time can be set in units of one
minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER .
The Break Timer is not available while the
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute •
Note
•
•
•
•
1
2
Displaying the Pointer
1
Press POINTER and press
P
/
R
/
O
/
Q
on the remote control to
move the pointer.
Press EFFECT to change the pointer icon
(5 types).
Star Finger1 Finger2 Heart Underline
2
Press POINTER again.
The pointer will disappear.
Using the Spot Function
1
Press SPOT and press
P
/
R
/
O
/
Q
on the remote control to move
the spot area.
Press EFFECT to change the spot area
size (3 types).
1/9 1/25 1/8
2
Press SPOT again.
The spot area will disappear.
Switching the Eco+Quiet
Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
When the Eco+Quiet Mode is set to “ON”, the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Refer to “Eco+Quiet” on page 42 for details. •
Note
•
•
•
•
•
1
2
1
2